Model: 3011-D05

3011-D05

7.5-20Watt Hybrid DC-DC Converter

Completely self contained Thick Film Hybrid DC-DC Converter

For MIL-STD 704/1275 applications

Built in EMI input filter meets MIL-STD 461C requirements CE01,CE03, CS01, CS02 & CS06

Inhibit-not function

Short Circuit protection

Fully Isolated design

200kHz operation for low ripple and fast response time

No External Filter Caps required

Fully hermetic package

Input: 28 VDC

Input Range (Continuous): 16 VDC to 50 VDC

Input Range (Full Power): 18 VDC to 50 VDC

Transient Survival Voltage: 80 VDC

Isolation Input to Case: -1500 VDC

Isolation Input to Output: 500 VDC

Isolation Output to Case: 100 VDC

Storage Temp: -55 °C to 150 °C

Shock: 50 G's

Acceleration: 500 G's

Vibration: 30 G's

Weight: 55 gms typical

Grade I:

Full Output Power at T_case = 85°C

Minimum Output Power at T_case = -55°C

Linearly derates to zero at T_case = 115

TID up to kRad(Si)
No SEE up to 60MeV*cm²/mg

Grade M:

Full Output Power at T_case = 85°C

Minimum Output Power at T_case = -55°C

Linearly derates to zero at T_case = 115

TID up to kRad(Si)
No SEE up to 60MeV*cm²/mg

Grade E:

Full Output Power at T_case = 125°C

Minimum Output Power at T_case = -55°C

Linearly derates to zero at T_case = 135

TID up to kRad(Si)
No SEE up to 60MeV*cm²/mg

Parameters	Conditions	3011-D05 (20W)
Parameters	Conditions	MIN	TYP	MAX
Output Voltage (FLD)	^+lout = ^-lout+	+4.9 -4.9	+5.0 -5.0	+5.1 -5.1
Output current	V_{in min} — V_{in max}	±150mA	-	±2A
Efficiency	P_out = max rated load	72%	76%	-
Line regulation	P_out = max rated load V_{in min} — V_{in max}	-	±10mV	±50mV
Load regulation	P_out = 10% to F.L.	-	±10mV	±50mV
Output ripple	F.L. BW 2 MHz mV_pp	-	40	85

Part Number Designator	Case Style	Pin Count	Mounting	Step File
2	Case Style 2	12	Solder Sealed Flangelss PCB Mount	View PDF
F – 10 Pin	Case Style 3	10	Solder Sealed Flanged PCB Mount	View PDF