+1.631.345.3100
Made in the USA

Model: 3051-D05

3051-D05

32.5-80 Watt Hybrid DC-DC Converter

Features

RadHard TID >100kRad(Si)
2:1 Margin: Operates beyond 200kRad TID
No SEE: LET > 82meV*cm^2/mg
Proton Resistant: No optocouplers used
Specifically designed for redundant space applications
Completely self contained Thick Film Hybrid DC-DC Converter
No External Filter Caps required
Fully Isolated design
Inhibit-not function
Power on soft start
200kHz operation for low ripple and fast response time
Built in EMI input filter meets MIL-STD 461C requirements CE01,CE03, CS01, CS02 & CS06
Short Circuit protection
Over voltage protection
BIT

Specifications

Input: 120 VDC
Input Range (Continuous): 86 VDC to 158 VDC
Isolation Input to Case: 500 VDC
Isolation Input to Output: 500 VDC
Isolation Output to Case: 100 VDC
Storage Temp: -55 VDC to 150 VDC
Shock: 50 G's
Acceleration: 500 G's
Vibration: 30 G's
Weight: 160 gms typical

Environment

Grade EU:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade L:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to 45kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade LE:
Full Output Power at Tcase = 125°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 135
TID up to 45kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade S:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to 100kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade SE:
Full Output Power at Tcase = 125°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 135
TID up to 100kRad(Si)
No SEE up to 60MeV*cm2/mg

Dual Output Devices

Parameters Conditions 3051-D05 (80W)
MIN TYP MAX
Output Voltage (FLD) +lout = -lout+ +4.9
-4.9		 +5.0
-5.0		 +5.1
-5.1
Output current Vin min — Vin max ±266mA -
-		 ±7.5A
Efficiency Pout = max rated load 73% 77% -
Line regulation Pout = max rated load
Vin min — Vin max		 - ±10mV
 ±50mV
Load regulation Pout = 10% to F.L. -
 ±10mV ±50mV
Output ripple F.L. BW 2 MHz
mVpp		 -
-		 40 85

Pinout Table

3051-DXX
Pin-1: bit
Pin-2: inhibit not
Pin-3: soft start
Pin-4: sync
Pin-5: N/C
Pin-6: input ret
Pin-7: + input
Pin-8: N/C
Pin-9: N/C
Pin-10: + dual output
Pin-11: dual output ret
Pin-12: - dual output

Case Styles

Part Number Designator Case Style Pin Count Mounting Step File
4 Case Style 4 12 Solder Sealed Flanged PCB Mount —
LF Case Style 7 12 Solder Sealed Flanged PCB Mount View PDF
ZF Case Style 9 12 Seam Weld Flanged Chassis Mount View PDF
PD Case Style 11 12 Solder Sealed PCB Stud Mount View PDF