+1.631.345.3100
Made in the USA

Model: 5680-D12

Print Page

5680-D12

12.5-30Watt Hybrid DC-DC Converters

Features

RadHard TID >100kRad(Si)
2:1 Margin: Operates beyond 200kRad TID
No SEE: LET > 82meV*cm^2/mg
Proton Resistant: No optocouplers used
Specifically designed for redundant space applications
Completely self contained Thick Film Hybrid DC-DC Converter
No External Filter Caps required
Fully Isolated design
Inhibit-not function
Power on soft start
200kHz operation for low ripple and fast response time
Built in EMI input filter meets MIL-STD 461C requirements CE01,CE03, CS01, CS02 & CS06
Short Circuit protection
Over voltage protection
BIT

Specifications

Input: 28 VDC
Input Range (Continuous): 16 VDC to 50 VDC
Input Range (Full Power): 18 VDC to 50 VDC
Transient Survival Voltage: 80 VDC
Isolation Input to Case: 500 VDC
Isolation Input to Output: 500 VDC
Isolation Output to Case: 100 VDC
Storage Temp: -55 °C to 150 °C
Shock: 50 G's
Acceleration: 500 G's
Vibration: 30 G's
Weight: 75 gms typical

Environment

Grade EU:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade L:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to 45kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade LE:
Full Output Power at Tcase = 125°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 135
TID up to 45kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade S:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to 100kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade SE:
Full Output Power at Tcase = 125°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 135
TID up to 100kRad(Si)
No SEE up to 60MeV*cm2/mg

Additional Notes

For multiple output models:

Up to 90% full power available from either output if rated output power is not exceeded; balanced load conditions

 

Dual Output Devices

Toggle Columns: Parameter - Conditions
Parameters Conditions 5680-D12 (30W) MIN 5680-D12 (30W) TYP 5680-D12 (30W) MAX
Output set voltage — +11.9
-11.9		 +12.0
-12.0		 +12.1
-12.1
Output current Vin min — Vin max ±95mA — ± 1.25A
Efficiency Pout = max rated load 78% 82% —
Line regulation Pout = max rated load
Vin min — Vin max		 — ±20mV ±100mV
Load regulation Pout = 10% to F.L. — ±20mV ±100mV
Output ripple F.L. BW 2 MHz
mVpp		 — 60 150

Pinout Table

5680-Dxx
Pin-1: BIT
Pin-2: Inhibit Not
Pin-3: Soft Start
Pin-4: Sync
Pin-5: Adjust
Pin-6: Input Return
Pin-7: + Input
Pin-8: + Remote Sense
Pin-9: - Remote Sense
Pin-10: + Dual Output
Pin-11: Dual Output Return
Pin-12: - Dual Output

Case Styles

Part Number Designator Case Style Pin Count Mounting Step File
2 Case Style 2 12 Solder Sealed Flangelss PCB Mount Download
F – 10 Pin Case Style 3 10 Solder Sealed Flanged PCB Mount Download
I Case Style 5 12 Seam Weld Flangeless PCB Mount Download
IF Case Style 6 12 Seam Weld Flanged PCB Mount Download
WF Case Style 8 12 Seam Weld Flanged Chassis Mount Download
PB Case Style 10 12 Solder Sealed PCB Stud Mount Download
PE Case Style 12 12 Seam Weld Stud PCM Mount Download