+1.631.345.3100
Made in the USA

Product Series: 3011

Print Page

3011

7.5-20Watt Hybrid DC-DC Converter

Features

Completely self contained Thick Film Hybrid DC-DC Converter
For MIL-STD 704/1275 applications
Built in EMI input filter meets MIL-STD 461C requirements CE01,CE03, CS01, CS02 & CS06
Inhibit-not function
Short Circuit protection
Fully Isolated design
200kHz operation for low ripple and fast response time
No External Filter Caps required
Fully hermetic package

Specifications

Input: 28 VDC
Input Range (Continuous): 16 VDC to 50 VDC
Input Range (Full Power): 18 VDC to 50 VDC
Transient Survival Voltage: 80 VDC
Isolation Input to Case: -1500 VDC
Isolation Input to Output: 500 VDC
Isolation Output to Case: 100 VDC
Storage Temp: -55 °C to 150 °C
Shock: 50 G's
Acceleration: 500 G's
Vibration: 30 G's
Weight: 55 gms typical

Environment

Grade I:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade M:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade E:
Full Output Power at Tcase = 125°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 135
TID up to kRad(Si)
No SEE up to 60MeV*cm2/mg

Warning: Uninitialized string offset 0 in /home/mdipower/www/www/wp-content/themes/mdipower-2025/functions.php on line 337

Warning: Uninitialized string offset 0 in /home/mdipower/www/www/wp-content/themes/mdipower-2025/functions.php on line 337

Warning: Uninitialized string offset 0 in /home/mdipower/www/www/wp-content/themes/mdipower-2025/functions.php on line 337

Single Output Devices

Toggle Columns: Parameter - Conditions
Parameters Conditions 3011-S02 (20W) 3011-S02.5 (20W) 3011-S03.3 (20W) 3011-S05 (20W) 3011-S05.2 (20W) 3011-S12 (20W) 3011-S15 (20W) 3011-S28 (20W)
3011-S02 (20W) MIN 3011-S02 (20W) TYP 3011-S02 (20W) MAX 3011-S02.5 (20W) MIN 3011-S02.5 (20W) TYP 3011-S02.5 (20W) MAX 3011-S03.3 (20W) MIN 3011-S03.3 (20W) TYP 3011-S03.3 (20W) MAX 3011-S05 (20W) MIN 3011-S05 (20W) TYP 3011-S05 (20W) MAX 3011-S05.2 (20W) MIN 3011-S05.2 (20W) TYP 3011-S05.2 (20W) MAX 3011-S12 (20W) MIN 3011-S12 (20W) TYP 3011-S12 (20W) MAX 3011-S15 (20W) MIN 3011-S15 (20W) TYP 3011-S15 (20W) MAX 3011-S28 (20W) MIN 3011-S28 (20W) TYP 3011-S28 (20W) MAX
Output Voltage (FLD) — +1.9 +2.0 +2.1 +2.4 +2.5 +2.6 +3.2 +3.3 +3.4 +4.9 +5.0 +5.1 +5.1 +5.2 +5.3 +11.9 +12.0 +12.1 +14.9 +15.0 +15.1 +27.8 +28.0 +28.2
Output current Vin min — Vin max - - 4A - - 4A - - 4A - - 4A - - 3.85A - - 1.67A - - 1.33A - - 714A
Efficiency Pout = max rated load 56% 61% - 61% 66% - 66% 69% - 71% 74% - 71% 74% - 78% 82% - 79% 83% - 78% 82% -
Line regulation Pout = max rated load
Vin min — Vin max		 - 10mV 30mV - 10mV 30mV - 10mV 30mV - 10mV 50mV - 10mV 50mV - 20mV 100mV - 25mV 125mV - 50mV 250mV
Load regulation Pout = 10% to F.L. - 10mV 30mV - 10mV 30mV - 10mV 30mV - 10mV 50mV - 10mV 50mV - 20mV 100mV - 25mV 125mV - 50mV 250mV
Output ripple F.L. BW 2 MHz
mVpp		 - 25 50 - 30 60 - 30 60 - 40 85 - 40 85 - 60 150 - 75 180 - 150 350

Dual Output Devices

Toggle Columns: Parameter - Conditions
Parameters Conditions 3011-D05 (20W) 3011-D12 (20W) 3011-D15 (20W) 3011-T05 (20W) 3011-T12 (20W) 3011-T15 (20W)
3011-D05 (20W) MIN 3011-D05 (20W) TYP 3011-D05 (20W) MAX 3011-D12 (20W) MIN 3011-D12 (20W) TYP 3011-D12 (20W) MAX 3011-D15 (20W) MIN 3011-D15 (20W) TYP 3011-D15 (20W) MAX 3011-T05 (20W) MIN 3011-T05 (20W) TYP 3011-T05 (20W) MAX 3011-T12 (20W) MIN 3011-T12 (20W) TYP 3011-T12 (20W) MAX 3011-T15 (20W) MIN 3011-T15 (20W) TYP 3011-T15 (20W) MAX
Output Voltage (FLD) +lout = -lout+ +4.9
-4.9		 +5.0
-5.0		 +5.1
-5.1		 +11.9
-11.9		 +12.0
-12.0		 +12.1
-12.1		 +14.9
-14.9		 +15.0
-15.0		 +15.1
-15.1		 +4.9
+4.9
-4.9		 +5.0
+5.0
-5.0		 +5.1
+5.1
-5.1		 +4.9
+11.9
-11.9		 +5.0
+12.0
-12.0		 +5.1
+12.1
-12.1		 +4.9
+14.9
-14.9		 +5.0
+15.0
-15.0		 +5.1
+15.1
-15.1
Output current Vin min — Vin max ±150mA - ±2A ±125mA - ±833mA ±100mA - ±667mA 200mA
±15mA		 -
-		 2A
±250mA		 200mA
±15mA		 -
-		 2A
±208mA		 200mA
±15mA		 -
-		 2A
±167mA
Efficiency Pout = max rated load 72% 76% - 78% 82% - 79% 83% - 66% 69% - 71% 74% - 71% 74% -
Line regulation Pout = max rated load
Vin min — Vin max		 - ±10mV ±50mV - ±20mV ±100mV - ±25mV ±125mV -
-		 10mV
25mV		 50mV
50mV		 -
-		 10mV
25mV		 50mV
50mV		 -
-		 10mV
25mV		 50mV
50mV
Load regulation Pout = 10% to F.L. - ±10mV ±50mV - ±20mV ±100mV - ±25mV ±125mV -
-		 10mV
25mV		 50mV
50mV		 -
-		 10mV
25mV		 50mV
50mV		 -
-		 10mV
25mV		 50mV
50mV
Output ripple F.L. BW 2 MHz
mVpp		 - 40 85 - 60 150 - 75 180 -
-		 40
-		 85
50		 -
-		 40
-		 85
50		 -
-		 40
-		 85
50

Pinout Table

3011-SXX<24 3011-SXX≥24 3011-DXX 3011-TXX
Pin-1: + input Pin-1: + input Pin-1: + input Pin-1: + input
Pin-2: inhibit not Pin-2: inhibit not Pin-2: inhibit not Pin-2: inhibit not
Pin-3: output adjust Pin-3: main output Pin-3: + dual output Pin-3: + dual output
Pin-4: main out ret Pin-4: N/C Pin-4: dual out ret Pin-4: dual out ret
Pin-5: main output Pin-5: main out ret Pin-5: - dual output Pin-5: - dual output
Pin-6: N/C Pin-6: N/C Pin-6: N/C Pin-6: main out ret
Pin-7: N/C Pin-7: N/C Pin-7: N/C Pin-7: main output
Pin-8: case Pin-8: case Pin-8: case Pin-8: case
Pin-9: N/C Pin-9: N/C Pin-9: N/C Pin-9: N/C
Pin-10: input return Pin-10: input return Pin-10: Input return Pin-10: input return

Case Styles

Part Number Designator Case Style Pin Count Mounting Step File
2 Case Style 2 12 Solder Sealed Flangelss PCB Mount Download
F – 10 Pin Case Style 3 10 Solder Sealed Flanged PCB Mount Download