+1.631.345.3100
Made in the USA

Product Series: 3090

Print Page

3090

3.25 – 5 Watt Hybrid DC-DC Converter

Features

Built in EMI input filter meets MIL-STD 461D/E/F requirements CE101,CE102, CS101, CS114, CS115 & CS116.
Meets DO160C/D/E/F/G CE Section 21 & CS Sections 20 & 22.
For MIL-STD 704/1275 applications
Completely self contained Thick Film Hybrid DC-DC Converter
No External Filter Caps required
Inhibit-not function
Fully Isolated design
Short Circuit protection
250kHz operation for low ripple and fast response time
Fully hermetic package

Specifications

Input: 28 VDC
Input Range (Continuous): 16 VDC to 50 VDC
Input Range (Full Power): 18 VDC to 50 VDC
Transient Survival Voltage: 80 VDC
Isolation Input to Case: 500 VDC
Isolation Input to Output: 500 VDC
Storage Temp: -55 °C to 150 °C
Shock: 50 G's
Acceleration: 500 G's
Vibration: 30 G's
Weight: 20 gms typical

Environment

Grade I:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade M:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade E:
Full Output Power at Tcase = 125°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 135
TID up to kRad(Si)
No SEE up to 60MeV*cm2/mg

Single Output Devices

Toggle Columns: Parameter - Conditions
Parameters Conditions 3090-S02.5 (5W) 3090-S03.3 (5W) 3090-S05 (5W) 3090-S05.2 (5W) 3090-S12 (5W) 3090-S15 (5W) 3090-S28 (5W)
3090-S02.5 (5W) MIN 3090-S02.5 (5W) TYP 3090-S02.5 (5W) MAX 3090-S03.3 (5W) MIN 3090-S03.3 (5W) TYP 3090-S03.3 (5W) MAX 3090-S05 (5W) MIN 3090-S05 (5W) TYP 3090-S05 (5W) MAX 3090-S05.2 (5W) MIN 3090-S05.2 (5W) TYP 3090-S05.2 (5W) MAX 3090-S12 (5W) MIN 3090-S12 (5W) TYP 3090-S12 (5W) MAX 3090-S15 (5W) MIN 3090-S15 (5W) TYP 3090-S15 (5W) MAX 3090-S28 (5W) MIN 3090-S28 (5W) TYP 3090-S28 (5W) MAX
Output Voltage (FLD) — +2.4 +2.5 +2.6 +3.2 +3.3 +3.4 +4.9 +5.0 +5.1 +5.1 +5.2 +5.3 +11.9 +12.0 +12.1 +14.9 +15.0 +15.1 +27.8 +28.0 +28.2
Output current Vin min — Vin max - - 1A - - 1A - - 1A - - 961mA - - 416mA - - 333mA - - 178mA
Efficiency Pout = max rated load 59% 62% - 64% 67% - 69% 72% - 69% 72% - 76% 80% - 77% 81% - 76% 80% -
Line regulation Pout = max rated load
Vin min — Vin max		 - 10mV 30mV - 10mV 30mV - 10mV 50mV - 10mV 50mV - 20mV 100mV - 25mV 125mV - 50mV 250mV
Load regulation Pout = 10% to F.L. - 10mV 30mV - 10mV 30mV - 10mV 50mV - 10mV 50mV - 20mV 100mV - 25mV 125mV - 50mV 250mV
Output ripple F.L. BW 2 MHz
mVpp		 - 30 60 - 30 65 - 40 85 - 40 85 - 60 150 - 75 180 - 150 350

Dual Output Devices

Toggle Columns: Parameter - Conditions
Parameters Conditions 3090-D05 (5W) 3090-D12 (5W) 3090-D15 (5W)
3090-D05 (5W) MIN 3090-D05 (5W) TYP 3090-D05 (5W) MAX 3090-D12 (5W) MIN 3090-D12 (5W) TYP 3090-D12 (5W) MAX 3090-D15 (5W) MIN 3090-D15 (5W) TYP 3090-D15 (5W) MAX
Output Voltage (FLD) +lout = -lout+ +4.9
-4.9		 +5.0
-5.0		 +5.1
-5.1		 +11.9
-11.9		 +12.0
-12.0		 +12.1
-12.1		 +14.9
-14.9		 +15.0
-15.0		 +15.1
-15.1
Output current Vin min — Vin max ±35mA - ±500mA ±15mA - ±208mA ±12mA - ±166mA
Efficiency Pout = max rated load 71% 74% - 76% 80% - 77% 81% -
Line regulation Pout = max rated load
Vin min — Vin max		 - ±10mV ±50mV - ±20mV ±100mV - ±25mV ±125mV
Load regulation Pout = 10% to F.L. - ±10mV ±50mV - ±20mV ±100mV - ±25mV ±125mV
Output ripple F.L. BW 2 MHz
mVpp		 - 40 85 - 60 150 - 75 180

Pinout Table

3090-SXX<24 3090-SXX≥24 3090-DXX
Pin-1: N/C Pin-1: N/C Pin-1: N/C
Pin-2: N/C Pin-2: N/C Pin-2: N/C
Pin-3: N/C Pin-3: N/C Pin-3: N/C
Pin-4: case Pin-4: case Pin-4: Case
Pin-5: N/C Pin-5: N/C Pin-5: -Dual Output
Pin-6: main out ret Pin-6: main out ret Pin-6: Output Com Return
Pin-7: main out ret Pin-7: main out ret Pin-7: Output Com Return
Pin-8: N/C Pin-8: N/C Pin-8: N/C
Pin-9: main output Pin-9: main output Pin-9: +Dual Output
Pin-10: N/C Pin-10: N/C Pin-10: N/C
Pin-11: N/C Pin-11: N/C Pin-11: N/C
Pin-12: N/C Pin-12: N/C Pin-12: N/C
Pin-13: N/C Pin-13: N/C Pin-13: N/C
Pin-14: N/C Pin-14: N/C Pin-14: N/C
Pin-15: inhibit not Pin-15: inhibit not Pin-15: Inhibit Not
Pin-16: N/C Pin-16: N/C Pin-16: N/C
Pin-17: input ret Pin-17: input ret Pin-17: Input Ret
Pin-18: + input Pin-18: + input Pin-18: + Input

Case Styles

Part Number Designator Case Style Pin Count Mounting Step File
1 Case Style 1 18 Solder Sealed Flangeless PCB Mount Download
D Case Style 14 18 Seam Weld Flangeless PCB Mount —
TF Case Style 15 18 Seam Weld Flanged Chassis Mount —