+1.631.345.3100
Made in the USA

Product Series: 5085

Print Page

5085

6-15W POINT OF LOAD DC-DC REGULATORS

Features

RadHard TID >100kRad(Si)
2:1 Margin: Operates beyond 200kRad TID
No SEE: LET > 82meV*cm^2/mg
Proton Resistant: No optocouplers used
Completely self contained Thick Film Hybrid DC-DC Converter
Inhibit-not function
Fully hermetic package
Synchronous rectification for high efficiency
Non-isolated for intermediate bus applications
Adjustable output voltage trim
Synch input 1:1, 95-105 kHz
100kHz operation

Specifications

Input: 5 VDC
Input Range (Continuous): 4.6 VDC to 5.4 VDC
Isolation Input to Case: 100 VDC
Isolation Output to Case: 100 VDC
Storage Temp: -55 °C to 150 °C
Shock: 50 G's
Acceleration: 500 G's
Vibration: 30 G's
Weight: 50 gms typical

Environment

Grade EU:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade L:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to 45kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade LE:
Full Output Power at Tcase = 125°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 135
TID up to 45kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade S:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to 100kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade SE:
Full Output Power at Tcase = 125°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 135
TID up to 100kRad(Si)
No SEE up to 60MeV*cm2/mg

Single Output Devices

Toggle Columns: Parameter - Conditions
Parameters Conditions 5085-P01 (15W) 5085-P01.2 (15W) 5085-P01.5 (15W) 5085-P01.8 (15W) 5085-P02.0 (15W) 5085-P02.5 (15W) 5085-P03.3 (15W)
5085-P01 (15W) MIN 5085-P01 (15W) TYP 5085-P01 (15W) MAX 5085-P01.2 (15W) MIN 5085-P01.2 (15W) TYP 5085-P01.2 (15W) MAX 5085-P01.5 (15W) MIN 5085-P01.5 (15W) TYP 5085-P01.5 (15W) MAX 5085-P01.8 (15W) MIN 5085-P01.8 (15W) TYP 5085-P01.8 (15W) MAX 5085-P02.0 (15W) MIN 5085-P02.0 (15W) TYP 5085-P02.0 (15W) MAX 5085-P02.5 (15W) MIN 5085-P02.5 (15W) TYP 5085-P02.5 (15W) MAX 5085-P03.3 (15W) MIN 5085-P03.3 (15W) TYP 5085-P03.3 (15W) MAX
Output Voltage (FLD) Factory Trim 50% Load +0.95 +1.0 +1.05 +1.15 +1.2 +1.25 +1.4 +1.5 +1.6 +1.7 +1.8 +1.9 +1.9 +2.0 +2.1 +2.4 +2.5 +2.6 +3.2 +3.3 +3.4
Output current Vin min — Vin max - - 6A - - 6A - - 6A - - 6A - - 6A - - 6A - - 4.5A
Efficiency Pout = max rated load - 75% - - 78% - - 78% - - 80% - - 82% - - 85% - - 90% -
Line regulation Pout = max rated load
Vin min — Vin max		 - 10mV 30mV - 10mV 30mV - 10mV 30mV - 10mV 50mV - 10mV 50mV - 20mV 100mV - 25mV 125mV
Load regulation Pout = 10% to F.L. - 10mV 30mV - 10mV 30mV - 10mV 30mV - 10mV 50mV - 10mV 50mV - 20mV 100mV - 25mV 125mV
Output ripple F.L. BW 2 MHz
mVpp		 - 20 - - 20 - - 20 - - 20 - - 20 - - 25 - - 30 -

Pinout Table

5085
Pin-1: Positive Input
Pin-2: Positive Input
Pin-3: Input/Output Common
Pin-4: Output
Pin-5: Output
Pin-6: Case Ground
Pin-7: V ref
Pin-8: Adjust
Pin-9: I out
Pin-10: Sync Input
Pin-11: BIT
Pin-12: Inhibit-Not

Case Styles

Part Number Designator Case Style Pin Count Mounting Step File
2 Case Style 2 12 Solder Sealed Flangelss PCB Mount Download
F – 10 Pin Case Style 3 10 Solder Sealed Flanged PCB Mount Download
GF Case Style 6 12 Seam Weld Flanged PCB Mount Download
G Case Style 5 12 Seam Weld Flangeless PCB Mount Download
UF Case Style 8 12 Seam Weld Flanged Chassis Mount Download