+1.631.345.3100
Made in the USA

Product Series: 53629

Print Page

53629

40 Watt Quad Output Hybrid Proton Rad Hard 100K+®DC-DC Converter

Features

RadHard TID >100kRad(Si)
2:1 Margin: Operates beyond 200kRad TID
No SEE: LET > 82meV*cm^2/mg
Proton Resistant: No optocouplers used
Completely self contained Thick Film Hybrid DC-DC Converter
No External Filter Caps required
Fully Isolated design
Inhibit-not function
Power on soft start
200kHz operation for low ripple and fast response time
Built in EMI input filter meets MIL-STD 461C requirements CE01,CE03, CS01, CS02 & CS06
Short Circuit protection
Over voltage protection

Specifications

Input: 28 VDC
Input Range (Continuous): 19 VDC to 50 VDC
Isolation Input to Case: 500 VDC
Isolation Input to Output: 500 VDC
Isolation Output to Case: 100 VDC
Storage Temp: -55 °C to 150 °C
Shock: 50 G's
Acceleration: 500 G's
Vibration: 30 G's
Weight: 95 gms typical

Environment

Grade EU:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade L:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to 45kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade LE:
Full Output Power at Tcase = 125°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 135
TID up to 45kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade S:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to 100kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade SE:
Full Output Power at Tcase = 125°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 135
TID up to 100kRad(Si)
No SEE up to 60MeV*cm2/mg

Additional Notes

Model 53629 is a high efficiency cross regulated quad output DC-DC converter that incorporates a bu8idl in Mil-STD-461 EMI filter

High efficiency and excellent cross regulation are achieved by using a planar power transformer and GaAs rectifiers. Sync and Enable input are also provided.

Other input/output voltages are available on special order

A combined total of 40W may be drawn on all 4 outputs. Up to 750mA is available from the auxiliary outputs provided the total output power does not exceed 40W.

Quad Output Devices

Toggle Columns: Parameter - Conditions
Parameters Conditions 53629 (40W)
53629 (40W) MIN 53629 (40W) TYP 53629 (40W) MAX
Output set voltage — +4.9
-4.9
+15.1
-15.1		 +5.0
-5.0
+15.5
-15.5		 +5.1
-5.1
+15.9
-15.9
Output current Vin min — Vin max +300mA
-100mA
+75mA
-75mA		 — +3.0A
-1.0A
+750mA
-750mA
Efficiency Pout = max rated load 83% 85% —
Line regulation Pout = max rated load
Vin min — Vin max		 — ±15mV
±15mV		 ±65mV
±85mV
Load regulation Pout = 10% to F.L. — ±75mV
±175mV		 ±125mV
±250mV
Output ripple F.L. BW 2 MHz
mVpp		 — 25
35		 50
70

Pinout Table

53629
Pin-1: +28VDC Input
Pin-2: +28VDC Input Return
Pin-3: Enable
Pin-4: -5VDC Output Return
Pin-5: -5VDC Output
Pin-6: N/C
Pin-7: N/C
Pin-8: Sync
Pin-9: -15VDC Dual Output
Pin-10: Dual Output Return
Pin-11: +15VDC Output
Pin-12: Case
Pin-13: +5 VDC Main output
Pin-14: +5 VDC Main Output Return