+1.631.345.3100
Made in the USA

Model: 5080-P02.0

Print Page

5080-P02.0

4-10 WATT POINT OF LOAD DC-DC REGULATORS

Features

RadHard TID >100kRad(Si)
2:1 Margin: Operates beyond 200kRad TID
No SEE: LET > 82meV*cm^2/mg
Proton Resistant: No optocouplers used
Completely self contained Thick Film Hybrid DC-DC Converter
Inhibit-not function
Fully hermetic package
Synchronous rectification for high efficiency
Non-isolated for intermediate bus applications
Adjustable output voltage trim
Synch input 1:1, 95-105 kHz
100kHz operation

Specifications

Input: 12 VDC
Input Range (Continuous): 11 VDC to 16 VDC
Isolation Input to Case: 100 VDC
Isolation Output to Case: 100 VDC
Storage Temp: -55 °C to 150 °C
Shock: 50 G's
Acceleration: 500 G's
Vibration: 30 G's
Weight: 50 gms typical

Environment

Grade EU:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade L:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to 45kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade LE:
Full Output Power at Tcase = 125°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 135
TID up to 45kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade S:
Full Output Power at Tcase = 85°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 115
TID up to 100kRad(Si)
No SEE up to 60MeV*cm2/mg
Grade SE:
Full Output Power at Tcase = 125°C
Minimum Output Power at Tcase = -55°C
Linearly derates to zero at Tcase = 135
TID up to 100kRad(Si)
No SEE up to 60MeV*cm2/mg

Single Output Devices

Toggle Columns: Parameter - Conditions
Parameters Conditions 5080-P02.0 (10W) MIN 5080-P02.0 (10W) TYP 5080-P02.0 (10W) MAX
Output Voltage (FLD) Factory Trim 50% Load +1.9 +2.0 +2.1
Output current Vin min — Vin max - - 4A
Efficiency Pout = max rated load - 80% -
Line regulation Pout = max rated load
Vin min — Vin max		 - 10mV 50mV
Load regulation Pout = 10% to F.L. - 10mV 50mV
Output ripple F.L. BW 2 MHz
mVpp		 - 20 -

Pinout Table

5080
Pin-1: Positive Input
Pin-2: Positive Input
Pin-3: Positive Input
Pin-4: Common
Pin-5: Common
Pin-6: Common
Pin-7: Output
Pin-8: Output
Pin-9: Output
Pin-10: Case
Pin-11: Paralleling Input
Pin-12: Paralleling Output
Pin-13: Vref
Pin-14: Adjust
Pin-15: Iout
Pin-16: Sync
Pin-17: Bit
Pin-18: Inhibit Not

Case Styles

Part Number Designator Case Style Pin Count Mounting Step File
1 Case Style 1 18 Solder Sealed Flangeless PCB Mount Download
D Case Style 14 18 Seam Weld Flangeless PCB Mount —
TF Case Style 15 18 Seam Weld Flanged Chassis Mount —